产品中心
10G PIN-TIA光电探测器 Photodetector PT10XGC Nortel(BOOKHAM/Oclaro)
    发布时间: 2018-05-21 16:02    

The photodetector has an optical fiber tails input with a speed of 10Gbps and a built-in low noise preplay.It can be used for digital optical fiber communication;the sensitivity is up to -20.5dBm,the output voltage swing is 400mVpp,and the power consumption is low to 235mW.

Description
The module consists of a PIN photo-detector,a low noise preamplifier,a connectorized single-mode fiber pigtail and a hermetic metal package with coplanar output.Optimized for use in 10 Gb/s long haul applications,either as a discrete device or within a transponder,using NRZ Modulation.

Features
 
  • High sensitivity, -20.5dBm typical
  • Optical saturation power, +1dBm
  • Surface mount MSA compliant
  • Low capacitance high speed InGaAs PIN detector
  • Inner preamplifier with responsivity of 0.8A/W and trans-impedance gain 2200ohms
  • Hermetically sealed with SM fiber tail and DC coupled SMA output connector
  • Output stage limits at 400mVp-p differential eliminating the need for a post amplifier
  • Low Power Consumption, only 235mW
  • Designed to exceed the requirements of Bellcore GR468-CORE

Application
  • Long and short reach SONET/SDH systems
  • Optically pre-amplified receivers
  • Datacom systems up to 12.5 Gb/s


10G PIN-TIA Photodetector PT10XGC Nortel(BOOKHAM/Oclaro)